Harman DCC, the home of Signalist DCC decoders

4mm scale 3-aspect searchlight head fitted with a RGB LED (RGY LED for SH1a) representing the Westinghouse searchlight signals used in the UK. Can be fitted to non-operating Traintech signal mast or be fitted to a gantry.

See the Signal head manual for more information.

4mm scale 4-aspect searchlight head fitted with a RGB LED in the lower housing and a yellow LED in the upper housing (RGY LED in the lower housing for SH2a) representing the Westinghouse searchlight signals used in the UK. Can be fitted to non-operating Traintech signal mast or be fitted to a gantry.

See the Signal head manual for more information.

4mm scale (3' target) or 3.5mm scale (3'6" target) 3-aspect searchlight head fitted with a RGB LED (RGY LED for SH3a) representing the GRS searchlight signals used in the UK and North America. Can be fitted to non-operating Traintech signal mast or be fitted to a gantry.

See the Signal head manual for more information.

4mm scale dwarf head which can be fitted with two standard 1.8mm or 2mm LEDs

See the Signal head manual for more information.

4mm scale dwarf head which can be fitted with three standard 1.8mm or 2mm LEDs

See the Signal head manual for more information.

4mm scale (3' target) or 3.5mm scale (3'6" target) 3-aspect searchlight head fitted with a RGB LED (RGY LED for SH6a) representing the early style of searchlight signals used in the UK on the former Great Eastern area with a simple hood. Can be fitted to non-operating Traintech signal mast or be fitted to a gantry.

See the Signal head manual for more information.

3.5mm scale simulated cast signal mast base on concrete pad with mast finials. Socket has provision for 10-way IDC connector for easy wiring to a Signalist SC1 or Digitrax SE8C with ribbon cable. Base has provision for fitting a 5-strip wide piece of stripboard with a 2x5 pin header to terminate wires from the signal heads. Use with metal tube (up to 2.5mm diameter), and etched ladder and SH series signal heads to make a complete signal mast. Mast can be simply unplugged for safe storage. Base can be used to convert almost any colour light signal to be plug-in including Eckon/Berko and Traintech.

See the Signal base manual for more information.

2mm scale signal mast convertor for converting a Digitrax SMBK signal base kit (triple pack) into 3x double head signal masts. Just add etched ladders to complete the mast.Supplied as two parts on a sprue that just clips on.